How To: Set up and manage Temp Monitor triggers

Once your sensors are active in your account you are able to set up triggers/alerts or to edit the existing triggers. 

Step 1. Click on Sensors from your Mobile Dashboard

Click_on_Sensors.png 

 

Step 2. Enter specific criteria you would like to set off the triggers in the corresponding fields. If you would like to add more criteria click on blue plus sign.  

Enter_criteria_for_sensors_you_want_to_add_a_trigger_to_.pngTemperature_and_other_criteria_to_set_up_a_trigger_.png    

Step 3. Once you have entered all of your criteria make to "Click Save". 

Hit_save_.png

Step 4. Name the trigger and select the Active Schedule (what hours the triggers should be set to go off) and a Threshold (how long the temperature has to stay about the threshold for that set amount of time). 

(i.e. In this example if the sensor goes below 39 degrees Fahrenheit. It will create an alert or create a task within 10 minutes)  

time_of_day_the_triggers_should_be_set_to_alert_the_team.png

how_long_the_tem_has_to_stay_above_the_threshold_for_that_set_amount_of_time_.png

Step 5. If you would like to create a task once the triggers goes off "Click Task" and choose what task you would like to generate, who to assign it to, and when it's due by as well any other details or instructions you would like to be sent. 

To_create_a_task_when_below_the_threshold.png

Step 5a. If you would like to add an Alert "Click Alerts". Choose the frequency you want the alert to go off and who should be alerted. 

how_frequently_you_would_like_the_alert.pngDifferent_frequency_options.png

Step 6. Once you have filled out the Trigger make sure to "Click Done" to save your trigger. 

Hit_Done.png

 

If you would like to edit an existing trigger: 

Step 1: "Click Sensors" and then "Click Triggers" to pull up the list of triggers from which you would like to edit. 

 to_edit_triggers_go_to_triggers.png

Step 2.  Choose the Report you want to edit. 

*Note: If you click on the drop down arrow this will ask if you want to delete the trigger.

Step 3. Once you have chosen the report you want to edit "Click Edit" .click_on_the_trigger_you_want_to_edit_.png

Step 4. Edit the criteria you want to change and once you have made the changes "Click Save". 

(i.e.  In this example we want to adjust the temperature that sets off the alerts when it is less than 45 degree Fahrenheit.) edit_the_criteria_and_hit_save.png

Step 5. Once saved you will receive a green Success Report Saved message. Once_saved_you_will_receive_a_gree_succcess_messafe.png

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request